安装在建筑入口的自动门，可根据要求选择不同的控制方式。比方，有感应的，有指纹控制的，有刷卡控制试的等，他们被统称为自动门。现在给大家在平常自动门基础保养方面支些招，让自动门更好的为您服务。自动门基础保养技巧如下：
The automatic gate installed at the entrance of the building can choose different control methods according to the requirements. For example, there is an induction, a fingerprint control, a brush control test, and so on. They are collectively referred to as automatic doors. Now, give you some advice on the basic maintenance of the ordinary automatic door, so that the automatic door will serve you better. The basic maintenance skills of the automatic door are as follows:
在自动门机械传动部分，要打齿轮油。自动门积尘多的地方要清洁干净，重新把润滑油打好。
In the automatic door mechanical transmission part, the gear oil should be used. The place where the automatic door accumulates more dust should be clean and clean, and the lubricating oil will be reproduced again.
不锈钢外壳千万不要用腐蚀性的清洁剂清洁，不然容易出现锈点，影响自动门的美观。
Stainless steel shell must not be cleaned with corrosive cleaners, otherwise rust spots are easy to appear, which will affect the beauty of the automatic door.
在使用过程中，如果发现自动门的门机不移动，并且有嗡嗡声，请关掉自动门的电源。马上查看自动门是否有异物卡住，排除故障后再恢复供电。
In the use of the automatic door, if it is found that the door machine does not move, and there is a buzzing sound, please turn off the power of the automatic door. Immediately check whether the automatic door has a foreign object stuck, after the troubleshooting, restore power supply.
如果出现自动门的门体总是出现不断的开、关的话，马上关掉电源，及时检查自动门的感应器及相关电路，并及时更换好损坏的原器件。以免损坏马达电机，造成更大的损失。
If the door of the automatic door is always open and shut, turn off the power immediately, check the inductor and the relevant circuit of the automatic door, and replace the damaged devices in time. In order to avoid damage to motor motor, cause more loss.
如果自动门有部分玻璃发生破啐的情况下请关掉电源，以免造成左右得重量不平等造成马达电机损坏。
If there is some broken glass automatic door spit case please turn off the power, so as to avoid the weight about inequality caused by motor damage.